Skip to main content
Skip table of contents

Device Settings

Edge Storage

The Edge storage functionality enables uninterrupted recording during network blackouts. In practice, in-network blackout, the video feed can be stored on an SD memory card on the camera.
Once the network connection has been re-established, video is transmitted from the camera’s SD card to the server.
Please refer to the camera manufacturer documentation to see what cameras support the feature.
Edge storage must be enabled in the device settings.
This feature is configured solely through the camera’s configuration utility.
Please refer to the camera’s documentation for instructions on enabling Edge storage.

Edge storage fetching for offline period

When this is enabled, then Mirasys VMS transfers recordings from the camera SD card only from the time of the period, when the connection has been lost between the Mirasys VMS and IP camera

Camera in passive mode

  • If multiple servers have the same camera configured, then one should be made Active, and the others should be Passive.

  • This way, only the Active server settings are communicated to the camera.

Camera information

Camera name, resolution and record rate can be set directly from the Video tab

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.