Samalla Hälytys-ponnahdusikkuna-asetuksella kuin yllä, on mahdollista määrittää järjestelmä käyttämään useita hälytysvalvojia siten, että jokaisessa näytössä näkyy vain yksi hälytys (tai useita, jos halutaan). Järjestelmä voidaan määrittää esimerkiksi neljä erillistä hälytysmonitoria. Sitten hälytysmonitori numero 1 näyttää vanhimman hälytyksen, monitori 2 näyttää toiseksi vanhimman hälytyksen ja 3 näyttää kolmanneksi vanhimman hälytyksen. Näyttö 4 voidaan esimerkiksi määrittää näyttämään muut hälytykset.
Konfigurointi tehdään määrittämällä mikä hälytys Alarm-ponnahdusikkunassa tulee näkyä. Hälytysmonitori 1:n konfiguroimiseksi tulee valita ensimmäinen aktiivinen hälytys suodatuksesta.
Toiselle ja kolmannelle tulee avata uusi hälytysten ponnahdusikkuna ja sen jälkeen säätää suodatusta vastaavasti. Neljännelle ja lisähälytykselle asetusta tulee muuttaa seuraavasti:
Kun nämä neljän hälytyksen ponnahdusikkunat ovat auki ja määritettyinä, asettelu on nyt tallennettava. Jos aktiivisia hälytyksiä ei ole, hälytysmonitorit näyttävät selvitysnumeron, joka tietää, mikä monitori. Kun vain yksi hälytys on aktiivinen, se näkyy ensimmäinen näyttö.
Jos kaksi hälytystä on aktiivisia, vanhin näkyy ensimmäisessä näytössä ja uudempi hälytys avautuu toisessa näytössä.
Kolmas hälytys on kolmannessa näytössä.
When the oldest alarm ends, it will be closed from the first monitor (1). The monitors will automatically refresh so that the alarm previously in monitor 2 is now in monitor 1, and so on.
If the alarm settings have been defined so that alarm components are kept open longer than the alarm duration, the move of alarms will happen only when the alarm components are http://closed.In this case, the alarm colour in monitor one will change from the active alarm colour to the ended alarm colour. The alarm popup filter setting is saved to layouts and saved tabs. When using AVM, it is recommended to create a camera tab, open the alarm popup to the camera tab, configure the filter, and then save it with the appropriate name. The tab can then be opened to AVM using the AVM Operator http://Console.It is also possible to configure the multiple alarm monitors to show the Alarm popup and Profile map side by side by configuring the Profile map to use similar filtering settings as the alarm popup.