Breadcrumbs

The VMS Servers

On the VMS Servers tab, you can configure these settings for each server:

Icon

Name

Description
image-20230621-063914.png


General

Change the name and the description of the server. Here you will also find the IP address of the server. 
image-20230621-063921.png


Port forwarding

Users can see what the automatic port forwarding has configured as ports for this server. The ports can be changed if necessary.
image-20230621-063928.png


Hardware

Add IP cameras and select camera and audio drivers. 
image-20230621-063937.png


Cameras

Change camera parameters, recording schedules and motion detection settings. 
image-20230621-063948.png


Audio

Change audio detection settings and recording schedules.
image-20230621-063955.png


Digital I/O

Set digital I/O settings.
image-20230621-064002.png


Alarms

Set up alarm conditions and alarm actions. 
image-20230621-064010.png


Storage

Add a hard disk to a server and set the storage times for video, audio, and alarm files.
image-20230621-064019.png


Text channels

Set the names and descriptions of text data channels here.

To access the settings, do one of the following:

  • Select the settings you want to configure (for example, Cameras) and then click Edit in the lower-right corner of the navigation pane.

    NewItem224.jpg

  • Double-click the settings that you want to configure.

  • Drag the settings from the VMS Servers tab to the workspace.